{"id":2218,"date":"2026-09-04T09:00:58","date_gmt":"2026-09-04T09:00:58","guid":{"rendered":"https:\/\/tpufabrics.com\/?p=2218"},"modified":"2026-09-04T09:01:29","modified_gmt":"2026-09-04T09:01:29","slug":"polyether-tpu-vs-polyester-tpu-which-one-should-you-choose-for-your-application","status":"publish","type":"post","link":"https:\/\/tpufabrics.com\/ko\/polyether-tpu-vs-polyester-tpu-which-one-should-you-choose-for-your-application\/","title":{"rendered":"Polyether TPU vs Polyester TPU: Which One Should You Choose for Your Application?"},"content":{"rendered":"

\uc120\ud0dd\ud558\ub294 \ubc29\ubc95 \ud3f4\ub9ac\uc5d0\ud14c\ub974 TPU<\/a><\/strong> and polyester TPU is rarely a matter of picking the material with the highest specification on a datasheet. Both belong to the thermoplastic polyurethane family, yet their molecular structures give them different performance profiles in moisture, hydrolysis, abrasion, chemical exposure, low-temperature environments, and long-term use.<\/p>\n\n\n\n

For product developers and purchasing engineers, the more useful question is not simply which TPU performs better. The real question is:<\/p>\n\n\n\n

Which TPU chemistry is better suited to the product’s working environment, expected service life, and main failure risks?<\/strong><\/p>\n\n\n\n

That distinction becomes particularly important when TPU is used for coated fabrics and films. A finished TPU fabric is not defined by TPU chemistry alone. The base textile, coating weight, thickness, adhesion, welding process, product geometry, and operating conditions all affect the final result.<\/p>\n\n\n\n

For a hydration reservoir exposed to water for long periods, a polyether TPU system may be a strong starting point. For an industrial cover exposed to oil, abrasion, and mechanical loading, polyester TPU may provide a more suitable performance balance.<\/p>\n\n\n\n

The right selection starts with the application rather than the material name.<\/p>\n\n\n\n

Polyether TPU and Polyester TPU Have Different Strengths<\/h2>\n\n\n\n

The main structural difference comes from the soft segment used in the polyurethane system.<\/p>\n\n\n\n

Polyether TPU contains polyether segments, while polyester TPU contains polyester segments. That structural difference affects how the polymer interacts with water, temperature, chemicals, and mechanical stress.<\/p>\n\n\n\n

Polyether TPU is generally recognized for strong hydrolysis resistance, moisture resistance, low-temperature flexibility, and long-term performance in wet environments. These characteristics make it attractive for products that remain in contact with water or humid conditions.<\/p>\n\n\n\n

Polyester TPU generally provides strong mechanical properties, abrasion resistance, oil resistance, and resistance to many industrial chemicals. It is often considered when the product needs to withstand mechanical wear or exposure to oils and other aggressive substances.<\/p>\n\n\n\n

Neither material is universally superior. The better choice depends on which performance characteristics carry the greatest weight in the final product.<\/p>\n\n\n\n

\"\ud3f4\ub9ac\uc5d0\ud14c\ub974
\ud3f4\ub9ac\uc5d0\ud14c\ub974 TPU<\/figcaption><\/figure>\n\n\n\n

Hydrolysis Resistance Can Change the Material Selection<\/h2>\n\n\n\n

One of the most important differences appears when TPU is exposed to moisture for extended periods.<\/p>\n\n\n\n

Hydrolysis is a chemical degradation process involving water. Over a long service period, susceptible polyurethane structures can experience molecular-chain degradation. The result may include loss of mechanical strength, changes in flexibility, cracking, or deterioration of the material.<\/p>\n\n\n\n

This is why hydrolysis resistance should not be treated as a minor laboratory property when designing products that repeatedly encounter water.<\/p>\n\n\n\n

A material may perform perfectly during a short-term test but behave differently after prolonged exposure to warm and humid conditions.<\/p>\n\n\n\n

Polyether TPU generally has an advantage in this area because of its molecular structure. It is commonly selected for products where long-term exposure to moisture is expected.<\/p>\n\n\n\n

Typical examples include:<\/p>\n\n\n\n

    \n
  • Hydration reservoirs and water bladders<\/li>\n\n\n\n
  • Inflatable outdoor products<\/li>\n\n\n\n
  • Medical air-management products<\/li>\n\n\n\n
  • Certain oxygen-storage or gas-storage bags<\/li>\n\n\n\n
  • Waterproof flexible components<\/li>\n\n\n\n
  • Water sports equipment<\/li>\n\n\n\n
  • Products used in humid or wet environments<\/li>\n<\/ul>\n\n\n\n

    For these products, hydrolysis resistance can directly influence service life.<\/p>\n\n\n\n

    However, the material decision should still be based on the complete formulation and finished product. TPU grade, additives, coating thickness, textile construction, processing conditions, and actual exposure conditions all need to be considered.<\/p>\n\n\n\n

    When Abrasion and Mechanical Stress Matter More<\/h2>\n\n\n\n

    A different situation occurs when the main risk is physical wear rather than prolonged moisture exposure.<\/p>\n\n\n\n

    Industrial covers, protective fabrics, transport equipment, mechanical components, and heavy-duty flexible products may experience repeated rubbing, bending, compression, impact, and contact with oils.<\/p>\n\n\n\n

    In these applications, polyester TPU can be attractive because of its mechanical strength and abrasion resistance.<\/p>\n\n\n\n

    Consider a coated fabric used as an industrial protective cover. The material may be pulled over equipment, folded repeatedly, dragged across surfaces, and exposed to lubricants or industrial fluids.<\/p>\n\n\n\n

    In that case, choosing a material solely because it has excellent hydrolysis resistance would not necessarily produce the best product.<\/p>\n\n\n\n

    The product manager needs to identify the dominant failure mode first.<\/p>\n\n\n\n

    If the fabric fails because the coating wears through after repeated contact with rough surfaces, abrasion resistance becomes a priority.<\/p>\n\n\n\n

    If the coating remains mechanically intact but gradually deteriorates after long-term exposure to moisture, hydrolysis resistance becomes more important.<\/p>\n\n\n\n

    This is why material selection should begin with how the product is expected to fail<\/strong>, rather than simply comparing the maximum values on a technical datasheet.<\/p>\n\n\n\n

    Polyether TPU vs Polyester TPU: Practical Performance Comparison<\/h2>\n\n\n\n

    The following comparison provides a general direction for early-stage material selection. Actual performance varies by TPU grade, hardness, formulation, additives, processing method, and finished construction.<\/p>\n\n\n\n

    Performance factor<\/th>\ud3f4\ub9ac\uc5d0\ud14c\ub974 TPU<\/th>\ud3f4\ub9ac\uc5d0\uc2a4\ud130 TPU<\/th><\/tr>
    Hydrolysis resistance<\/td>\uc6b0\uc218<\/td>Good to moderate, depending on grade<\/td><\/tr>
    \uc800\uc628 \uc720\uc5f0\uc131<\/td>\uc6b0\uc218<\/td>\uc88b\uc74c<\/td><\/tr>
    Moisture resistance<\/td>\uc6b0\uc218<\/td>\uc88b\uc74c<\/td><\/tr>
    Abrasion resistance<\/td>Very good<\/td>\uc6b0\uc218<\/td><\/tr>
    \uae30\uacc4\uc801 \uac15\ub3c4<\/td>Very good<\/td>\uc6b0\uc218<\/td><\/tr>
    Oil resistance<\/td>\uc88b\uc74c<\/td>\uc6b0\uc218<\/td><\/tr>
    Chemical resistance<\/td>Very good<\/td>Excellent for many industrial chemicals<\/td><\/tr>
    Long-term wet exposure<\/td>\uc6b0\uc218<\/td>Application dependent<\/td><\/tr>
    Water-related applications<\/td>Strong choice<\/td>Suitable for selected applications<\/td><\/tr>
    Heavy mechanical wear<\/td>Very good<\/td>Strong choice<\/td><\/tr>
    Industrial environments<\/td>Very good<\/td>Strong choice<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    These characteristics should be treated as a starting point rather than an absolute ranking.<\/p>\n\n\n\n

    A high-performance polyether TPU can outperform a lower-grade polyester TPU in certain mechanical tests. The same applies in reverse. TPU formulation is a broad field, and two products labeled with the same chemistry can have substantially different performance.<\/p>\n\n\n\n

    When Polyether TPU Is the Better Starting Point<\/h2>\n\n\n\n

    Polyether TPU deserves closer consideration when moisture, hydrolysis, flexibility, or low-temperature performance is a major concern.<\/p>\n\n\n\n

    \uc218\ubd84 \uc800\uc7a5\uc18c<\/h3>\n\n\n\n

    Hydration reservoirs need more than a waterproof material. The polymer must maintain flexibility, airtightness, and physical integrity through repeated filling, emptying, folding, cleaning, and storage.<\/p>\n\n\n\n

    For long-term contact with water, hydrolysis resistance becomes an important material-selection criterion.<\/p>\n\n\n\n

    The final TPU should also be evaluated for the intended water-contact requirements, taste or odor considerations, regulatory requirements, welding compatibility, and finished-product performance.<\/p>\n\n\n\n

    \uc758\ub8cc\uc6a9 \uc5d0\uc5b4 \ub9e4\ud2b8\ub9ac\uc2a4<\/h3>\n\n\n\n

    Air mattresses and pressure-management products often use flexible coated fabrics that must remain airtight while being folded, inflated, deflated, and cleaned repeatedly.<\/p>\n\n\n\n

    A polyether TPU system can be advantageous where prolonged moisture exposure and flexibility are important.<\/p>\n\n\n\n

    However, material chemistry alone does not determine whether a material is appropriate for a medical product. The complete material system must meet the relevant application and regulatory requirements.<\/p>\n\n\n\n

    Outdoor and Water Sports Products<\/h3>\n\n\n\n

    Outdoor products are exposed to changing temperatures, humidity, rain, water, UV radiation, repeated folding, and mechanical movement.<\/p>\n\n\n\n

    For inflatable products, dry bags, waterproof equipment, and flexible water-related products, the combination of hydrolysis resistance and flexibility can make polyether TPU an attractive option.<\/p>\n\n\n\n

    Low-Temperature Applications<\/h3>\n\n\n\n

    Low-temperature flexibility becomes important when a fabric or film must remain flexible rather than becoming excessively stiff or brittle.<\/p>\n\n\n\n

    Cold-weather equipment, outdoor inflatable products, and certain flexible industrial products may therefore benefit from a TPU system designed for low-temperature performance.<\/p>\n\n\n\n

    Again, the actual service temperature should be tested against the selected grade rather than inferred from the TPU family alone.<\/p>\n\n\n\n

    When Polyester TPU May Be the Better Choice<\/h2>\n\n\n\n

    Polyester TPU becomes particularly interesting when mechanical durability, abrasion, oil resistance, or chemical exposure dominates the application.<\/p>\n\n\n\n

    Industrial Protective Fabrics<\/h3>\n\n\n\n

    Industrial fabrics often experience direct physical contact with machinery, metal surfaces, tools, and other materials.<\/p>\n\n\n\n

    Repeated friction can gradually damage a coating. In this environment, abrasion resistance can have a greater effect on service life than hydrolysis resistance.<\/p>\n\n\n\n

    Oil and Grease Exposure<\/h3>\n\n\n\n

    Equipment used around hydraulic systems, engines, machinery, and industrial production lines may encounter oils, greases, and chemical fluids.<\/p>\n\n\n\n

    Polyester TPU is often considered for applications where resistance to these substances is important.<\/p>\n\n\n\n

    The actual chemical resistance still needs to be verified against the specific fluid, concentration, temperature, and exposure duration. \u201cChemical resistant\u201d is not a universal property.<\/p>\n\n\n\n

    Heavy-Duty Flexible Components<\/h3>\n\n\n\n

    Some products need a balance of flexibility and high mechanical strength.<\/p>\n\n\n\n

    Polyester TPU can be useful when the material needs to withstand repeated mechanical stress while maintaining dimensional and structural integrity.<\/p>\n\n\n\n

    This makes it a potential candidate for industrial coated fabrics, protective products, reinforcement structures, and other applications where mechanical durability is a primary design target.<\/p>\n\n\n\n

    TPU Chemistry Is Only One Part of a Coated Fabric<\/h2>\n\n\n\n

    A common mistake during material selection is to compare polyether TPU and polyester TPU while ignoring the fabric underneath the coating.<\/p>\n\n\n\n

    For a TPU coated fabric, the final performance comes from a combination of:<\/p>\n\n\n\n

    TPU chemistry + base fabric + coating construction + adhesion + processing + product design<\/strong><\/p>\n\n\n\n

    A 20D nylon fabric coated with TPU behaves very differently from an 840D nylon fabric with the same TPU chemistry.<\/p>\n\n\n\n

    The lighter textile may be selected for low weight and flexibility. The heavier fabric may be designed for higher tensile strength, tear resistance, and load-bearing capability.<\/p>\n\n\n\n

    The TPU layer must then work with that textile rather than simply sit on top of it.<\/p>\n\n\n\n

    \uae30\ubcf8 \uc6d0\ub2e8 \uc120\ud0dd<\/h3>\n\n\n\n

    Nylon generally provides high strength and good abrasion performance. Polyester can offer different dimensional, environmental, and cost characteristics. Recycled textile options may be considered when sustainability requirements are part of the product specification.<\/p>\n\n\n\n

    The correct base fabric depends on the load, tear risk, flexibility requirements, weight target, and production method.<\/p>\n\n\n\n

    Coating Thickness<\/h3>\n\n\n\n

    Increasing coating thickness does not automatically create a better product.<\/p>\n\n\n\n

    A thicker TPU layer may improve certain barrier or durability characteristics, but it can also increase weight, influence flexibility, affect welding parameters, and change the feel of the finished fabric.<\/p>\n\n\n\n

    For a lightweight inflatable product, excessive coating weight may work against the original product requirement.<\/p>\n\n\n\n

    For an industrial product, insufficient coating thickness may reduce durability or barrier performance.<\/p>\n\n\n\n

    The target should therefore be the minimum construction that reliably meets the finished-product requirements<\/strong>, rather than simply choosing the thickest available coating.<\/p>\n\n\n\n

    Welding Performance Needs to Be Considered Early<\/h2>\n\n\n\n

    Many TPU coated fabrics are converted into finished products through heat welding, high-frequency welding, radio-frequency welding, or related joining processes.<\/p>\n\n\n\n

    The welding behavior depends on the TPU chemistry, hardness, thickness, coating structure, fabric construction, welding equipment, pressure, temperature, and cycle time.<\/p>\n\n\n\n

    This creates an important product-development issue.<\/p>\n\n\n\n

    A TPU film may show excellent tensile properties in laboratory testing but still cause problems during production if it does not form a stable weld window on the customer’s equipment.<\/p>\n\n\n\n

    A production team may encounter incomplete bonding, excessive deformation, weak seams, surface damage, or inconsistent weld strength.<\/p>\n\n\n\n

    For this reason, welding trials should be part of material qualification rather than something left until mass production.<\/p>\n\n\n\n

    The finished seam should be tested under conditions that represent actual use. Peel strength, airtightness, dimensional stability, bending, and repeated pressure cycles may all be relevant depending on the product.<\/p>\n\n\n\n

    Product Geometry Can Change the Material Requirement<\/h2>\n\n\n\n

    Material selection cannot be separated from product design.<\/p>\n\n\n\n

    Take an inflatable product as an example.<\/p>\n\n\n\n

    Two products can use the same TPU coated fabric but experience very different stress levels because of their size, shape, internal pressure, seam arrangement, and reinforcement design.<\/p>\n\n\n\n

    A small inflatable bladder and a large inflatable structure do not place the same mechanical demands on the fabric.<\/p>\n\n\n\n

    The stress around corners, welded seams, ports, valves, and reinforcement areas may also be higher than stress in the middle of a flat panel.<\/p>\n\n\n\n

    This means the material specification should be developed together with the product structure.<\/p>\n\n\n\n

    If a product has a known high-stress area, changing the base fabric, adding reinforcement, modifying the coating construction, or adjusting the seam design may be more effective than simply selecting a harder TPU.<\/p>\n\n\n\n

    How a Product Manager Should Make the Selection<\/h2>\n\n\n\n

    A practical selection process can start with five questions.<\/p>\n\n\n\n

    1. What environment will the product face?<\/h3>\n\n\n\n

    Identify water, humidity, temperature, UV exposure, oils, chemicals, abrasion, pressure, and mechanical movement.<\/p>\n\n\n\n

    2. What is the most likely failure mode?<\/h3>\n\n\n\n

    Will the product fail because of hydrolysis, abrasion, tearing, cracking, seam failure, chemical attack, or loss of airtightness?<\/p>\n\n\n\n

    The answer determines which material properties deserve the greatest weight.<\/p>\n\n\n\n

    3. What does the base fabric need to do?<\/h3>\n\n\n\n

    Determine whether the textile needs high tensile strength, tear resistance, low weight, dimensional stability, flexibility, or abrasion resistance.<\/p>\n\n\n\n

    4. How will the finished product be manufactured?<\/h3>\n\n\n\n

    Check coating, lamination, cutting, welding, sewing, bonding, and assembly requirements before finalizing the material.<\/p>\n\n\n\n

    5. How will the finished product be tested?<\/h3>\n\n\n\n

    Testing should reflect actual use rather than relying entirely on raw material datasheets.<\/p>\n\n\n\n

    For example, a water bladder should be tested for repeated filling, folding, pressure retention, leakage, and relevant water-contact requirements. An industrial cover should be evaluated for abrasion, chemical exposure, flexing, and mechanical durability.<\/p>\n\n\n\n

    The final decision should be based on finished-product performance.<\/p>\n\n\n\n

    Cost Should Be Calculated Over the Product Life<\/h2>\n\n\n\n

    Material price is important, but it is not always the best measure of cost.<\/p>\n\n\n\n

    A lower-cost TPU that requires a thicker coating, produces more production defects, has a narrow welding window, or has a shorter service life may create a higher total cost.<\/p>\n\n\n\n

    A more expensive TPU may reduce material consumption, improve production stability, or extend product life.<\/p>\n\n\n\n

    For procurement teams, the useful calculation is therefore not simply:<\/p>\n\n\n\n

    Price per kilogram of TPU<\/strong><\/p>\n\n\n\n

    It is closer to:<\/p>\n\n\n\n

    Material cost + processing cost + production loss + warranty risk + expected service life<\/strong><\/p>\n\n\n\n

    This approach is particularly relevant for B2B products where a material failure can result in returned products, field repairs, customer complaints, or production downtime.<\/p>\n\n\n\n

    Testing Both TPU Types Under the Same Conditions<\/h2>\n\n\n\n

    When the application could support either polyether or polyester TPU, comparative testing is often more reliable than relying on general material descriptions.<\/p>\n\n\n\n

    A useful test program may include:<\/p>\n\n\n\n

      \n
    • Tensile and tear strength<\/li>\n\n\n\n
    • Abrasion resistance<\/li>\n\n\n\n
    • Flex cracking<\/li>\n\n\n\n
    • Hydrolysis or accelerated aging<\/li>\n\n\n\n
    • \uc800\uc628 \uc720\uc5f0\uc131<\/li>\n\n\n\n
    • Oil and chemical exposure<\/li>\n\n\n\n
    • Peel strength<\/li>\n\n\n\n
    • Welding strength<\/li>\n\n\n\n
    • Airtightness<\/li>\n\n\n\n
    • Water resistance<\/li>\n\n\n\n
    • UV exposure where relevant<\/li>\n<\/ul>\n\n\n\n

      The exact test methods should be selected according to the finished product and target market.<\/p>\n\n\n\n

      For medical, food-contact, drinking-water, or oxygen-related products, additional compliance and application-specific validation may be required. A polymer family name by itself does not establish regulatory suitability.<\/p>\n\n\n\n

      Polyether TPU vs Polyester TPU Is a Risk-Management Decision<\/h2>\n\n\n\n

      From a product-development perspective, the selection can be summarized in a simple way.<\/p>\n\n\n\n

      If the product spends most of its life around water, humidity, moisture, or low temperatures<\/strong>, polyether TPU is often a strong candidate.<\/p>\n\n\n\n

      If the product faces abrasion, oil, mechanical loading, or demanding industrial chemical exposure<\/strong>, polyester TPU may deserve priority.<\/p>\n\n\n\n

      But the decision should not stop there.<\/p>\n\n\n\n

      The base fabric, coating thickness, TPU grade, hardness, additives, lamination method, welding process, product geometry, and expected service life can all change the final result.<\/p>\n\n\n\n

      That is why two products using the same TPU chemistry can require completely different material constructions.<\/p>\n\n\n\n

      Building the Right TPU Material System<\/h2>\n\n\n\n

      For TPU coated fabric manufacturers, material selection is more than supplying a roll of coated textile. The important task is matching the material construction with the customer’s finished-product requirements.<\/p>\n\n\n\n

      A product specification may begin with a simple request such as:<\/p>\n\n\n\n

      \u201cNeed a lightweight waterproof TPU fabric.\u201d<\/p>\n\n\n\n

      That description is not enough to select the correct construction.<\/p>\n\n\n\n

      A technical discussion should continue with questions about:<\/p>\n\n\n\n

        \n
      • Base fabric and denier<\/li>\n\n\n\n
      • TPU chemistry<\/li>\n\n\n\n
      • Coating or film thickness<\/li>\n\n\n\n
      • Finished weight<\/li>\n\n\n\n
      • Tensile and tear requirements<\/li>\n\n\n\n
      • \uc720\uc5f0\uc131<\/li>\n\n\n\n
      • \uc628\ub3c4 \ubc94\uc704<\/li>\n\n\n\n
      • Water or moisture exposure<\/li>\n\n\n\n
      • \ud654\ud559\ubb3c\uc9c8 \ub178\ucd9c<\/li>\n\n\n\n
      • Abrasion conditions<\/li>\n\n\n\n
      • \uc6a9\uc811 \ubc29\ubc95<\/li>\n\n\n\n
      • Final product geometry<\/li>\n\n\n\n
      • Required certifications or compliance<\/li>\n<\/ul>\n\n\n\n

        This approach gives both the manufacturer and customer a much clearer basis for material development.<\/p>\n\n\n\n

        For applications requiring prolonged water exposure, polyether TPU may provide the right foundation. For applications where mechanical wear and chemical exposure dominate, polyester TPU may offer a better balance.<\/p>\n\n\n\n

        The goal is not to choose the \u201cbetter\u201d TPU.<\/p>\n\n\n\n

        The goal is to choose the TPU system that gives the finished product the required performance, production stability, and service life at an acceptable total cost.<\/strong><\/p>\n\n\n\n

        That is the real value of material selection.<\/p>","protected":false},"excerpt":{"rendered":"

        Choosing between polyether TPU and polyester TPU is rarely a matter of picking the material with the highest specification on a datasheet. Both belong to the thermoplastic polyurethane family, yet their molecular structures give them different performance profiles in moisture, hydrolysis, abrasion, chemical exposure, low-temperature environments, and long-term use. For product developers and purchasing engineers, […]<\/p>\n","protected":false},"author":1,"featured_media":2220,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"_angie_page":false,"page_builder":"","footnotes":""},"categories":[39],"tags":[],"class_list":["post-2218","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry-news"],"acf":[],"_links":{"self":[{"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/posts\/2218","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/comments?post=2218"}],"version-history":[{"count":1,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/posts\/2218\/revisions"}],"predecessor-version":[{"id":2235,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/posts\/2218\/revisions\/2235"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/media\/2220"}],"wp:attachment":[{"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/media?parent=2218"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/categories?post=2218"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/tpufabrics.com\/ko\/wp-json\/wp\/v2\/tags?post=2218"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}